Infrared heater for spot heating of larges premises
White, grey or black
With included protective grille
Heats only when and where needed
Recommended installation height 3-10 m
Radiant heaters give an efficient and pleasant heat in the dwelling zone and individual comfort can be created with spot and zone heating. No moving parts mean a silent system that does not cause air movements, creating a hygienic indoor climate and reducing the spread of dust, bacteria, or odours.
IRCFC has an easy and flexible installation and requires a minimum of maintenance. It gives instant heat and no preheating is necessary. The angle of the heater can be adjusted for optimum comfort.
IRCFC is especially designed for spot heating of premises with large air volumes, such as churches, aircraft hangars and warehouses. Radiant heaters can give cost savings of up to 25% compared to convector heaters, especially in buildings with high ceilings that are used on an irregular basis.
IRCFC has a discreet and compact design. It is equipped with one to three halogen lamps and with glossy finished reflectors. The range includes models with a variety of sizes, colors, outputs, and protection classes.
IRCFC is especially designed for spot heating of premises with large air volumes, such as churches, aircraft hangars and warehouses.
Halogen infrared heater IRCFC is available in three versions:
IRCFC white: RAL9015 glossy, fitted with one to three lamps. IP20.
IRCFC grey: RAL9006 matt, fitted with one to three lamps. IP20.
IRCFC black: RAL9005 matt, fitted with one or two lamps. IP54.
The heaters must be placed so that they cover the area to be heated. Optimum comfort is achieved if the heat is distributed from at least two directions.
IRCFC is installed horizontally on the ceiling or on the wall with the supplied bracket. The IRCFC can also be suspended from the ceiling, e.g. from chains. The angle of the heater can be adjusted for optimum comfort.
IRCFC is intended for permanent installation.
Corrosion proof casing of aluminum.
A protective grille is included and pre-fitted on each unit.
Extra lamps are available as accessories.
The unit* must be installed with thermostat TPT16(WF) to comply with Commission Regulation (EU) 2024/1103 (Ecodesign). For improved efficiency accessories such as black bulb or distance control can be added. Please note that relaybox RB3 is required for 400V~ for control with TPT16(WF). Controls for installations not affected by the Ecodesign directive are available as well.
* This product is an electric visibly glowing radiant local space heater and, in order to be compliant with the mandatory ecodesign requirements set out in Commission Regulation (EU) 2024/1103, needs to be complemented with a control providing at least the following control functions TW(f2/f8). This means an electronic room temperature control plus week timer with open window detection and control accuracy with CA < 2 Kelvin and CSD < 2 Kelvin.